HOT ROD BRACKET CHALLENGE Class

Time
Breakout time: 3.000

Cars will run 2 Outside lanes only (Purple and Red)
2 passes in each lane
4 run average time closest to breakout time (without breaking out, i.e. going under breakout time) will be winner.

Car Body/Dimensions
American or Foreign (3D printed bodies allowed)
Wheel Base: Must be Factory Wheel Base “NO ALTERING “
Height: 4″ inches Maximum
Length: Limited To Model Length “NO EXTENSIONS”
Length from front nose of car to center of rear axle: 7 1/2″ maximum
Width: 3.5″ inches Maximum
Weight: 6.04 oz Maximum

4 axles & wheels must be installed in the wheel-weld area

Scale Model: Any (must fit size limits)

The outside of the body may be lightly sanded
No changing the Factory Profile
Bodies Can Be Enhanced with other stable materials such as Plastics, Metals, Etc
Front Bumpers, rear bumpers, tail light’s, windshield, rear glass must be installed
If convertible model, convertible top (soft top) must be installed
Side chrome, side mirrors do not need installed
Door window glass is optional

Note
Wheels/Car must clear the following Dimensions
Track center rail height: 1/4″ inch (7mm)
Track center rail width: 1 5/8″ inches (4.2cm

Raised/lifted Wheel
BSA, Revell, Pinecar and MaxV

Wheels
Type: BSA new or old-style, Revell, Pinecar and MaxV
Maybe CnCed, Lathed, Polished, and/or Sanded to true tread surface
The tread surface must remain flat and parallel to the bore
Lettering/markings must remain on the inside and outside of the wheels
Step removal, and hub coning is allowed
No bushings, sleeves, bearings, or material to be used/added in the wheel bore

Minimum Thread Width 7.5mm

Wheel weight: any

Axles
Nail head only
Minimum Diameter .084