GOVERNOR Class

Car Body ( the wooden/material structure that holds the weight, axles and other add ons)/ Total Car Dimensions

Wheel Base : Any as long as wheels do not exceed the 7″ total length requirement
Total Car Height : Not to exceed 3″ inches…
Total Car Length : Not to exceed 7″ inches…
Total Car BODY Width : Not to exceed 1-3/4″ inches…
Total Car Weight : Not to exceed 2.0 ounces (+.04) measured on 1/10th digital scale

Additional materials maybe added as long as they meet the rules

4 Axles & Wheels must be installed to the side of the car body directly across from one another / No more than a 10 degree angle

Track Center Rail Height : 1/4″ inch ( 7mm ) *
Track Center Rail Width : 1 5/8″ inches (4.2 cm) *

* Wheels must clear the outside to outside center rail width measurement

Axles

a. Minimum diameter .084
b. Axles must have a nail head

Wheels (No bearings)

New style POST 2009 BSA wheels ONLY

a. May be CnCed, lathed, polished and/or sanded to true the edge of tread, surface and circumference
b. The tread / contact surface must remain flat and parallel to the bore as humanly possible
c. 7.5mm Minimum Tread Width
d. All writing must remain visible on the outside of the wheel.